product (empty)




16W 230pcs Red LED Grow Light Panel + 100V-240V 50-60Hz AC Adaptor

16W 230pcs Red LED Grow Light Panel + 100V-240V 50-60Hz AC Adaptor

$55.99 tax excl.


Add to cart



Injection Molded Frame

- Rigid Frame with built in venting holes for better heat dissipation
- Fireproof Grade ABS Plastic
- Ultra Light Weight 414g
- Integrated On / Off Switch to easily turn on and shut off light

Interlocking multiple panels together to from Array of panels

Above Picture is to illustrate how to set up an array.
Actual number of panels will depend on the listing.


Strings not included

Mounting screws not included

- 4 built-in wall mounts for easy mounting to ceiling / walls
- 4 holes at the back to hang up panel


cUL Listed AC Adapter

Why? Why do we need an cUL Listed AC adaptor?
Unlike other 120V panels in the market that cause electric hazard in moist and humid environments, we have separated the AC power input from the panel and utilize a cUL Listed AC adaptor to supply 12V DC power to the panel. By configuring our panels to use low voltage, we have eliminated possible electric shock and fire hazards and thus give you a peace of mind.

Adaptor Specification:

Adaptor Retail Value: US$19.00

  Input Voltage (AC) 110 - 240V ~50/60Hz 0.35A
  Output Voltage (DC) 12V DC 1.5A
  Plug Size 2.1mm
  Certification cUL, CE
  Cable Length 150cm, 59inches


LED Features:

Red: 660nm

LEDs are rated at 10000mcd
Total Red LED: 230 pcs
100,000 hours of life
12 years of continuous operation
Energy consumption is 5-10% of a typical light bulb (depending on wavelength)
Red light stimulate flowering and seed production
Orange light stimulate growth of carotenoids to make plants stay healthy
light stimulate stem and leaf growth
White light are used to fill out other spectrums and acts as natural sunlight.
Minimum HEAT ( Energy Efficient )


Panel Specification:

  LED 230 pieces
  Power 18W : approximately equal to the
red ray of a 225W incandescent light
  Input 12V DC with 2.1mm plug
  Size 30.5cm X 15.0cm X 3.8 cm or
12.0 X 6.0 X 1.5 inches
  Hours 100,000 hours
  Wavelength Red: 660nm
  mcd Red: 10000mcd
  Configuration series and parallel configuration

Why LEDs?

The LED Grow Light is convenient to use. They are ideal for replacing incandescent or halogen light bulbs. The LED light bulbs have a super long life that last for 100,000 hours. That would be more than 12 years of continuous operation. Since LED is in a solid state (no filament) it is almost indestructible (not if you intended to destroy it). LEDs are about 10 times the efficiency of a typical flashlight bulb, so you get more light and you can cut down your electric bill at the same time.

High Efficiency

The wavelengths of some LED are compatible with the absorption peak of the pigments involved in photosynthesis and photomorphogenesis. Only necessary light for those physiological functions can be irradiated.

Low Thermal Irradiation
LED in the visible light area contain little heat rays, allowing for short-distance irradiation.

Reduced Energy Consumption and Long Life
LED substantially reduce power consumption. Depending on the operating environment, an LED can provide thousands of hours of light.

Life Of LED
Since an LED emits light through a semiconductor device, its life is many times longer than that of other light sources (however, it can be affected by the operating environment).

Life Of LED

Spectral Distribution Comparison

LED is developed to emit a specific color efficiently by adjusting the materials used in the semiconductor compounds. The wavelength of an LED is relatively fixed, but not as much as that of a laser beam. Another distinction, LED in the visible range contain little heat rays. Therefore, they radiate almost no heat in the direction of emission. Below are comparison of LED and other lamps' spectral Distribution:


Spectral Distribution Comparison
Relative Irradiance Percentage
Metal Halide Lamp
High Pressure Sodium Lamp


lighting energy is used in an important photoreaction, the synthesis of carbon dioxide and water into organic compounds. The pigments called chlorophyll play a role in this reaction by absorbing light.

Photosynthetic Rate
Absorption Peaks
Blue and Red Lights are Important


LED Irradiation on Stem Elongation and Flowering

Choose the right color for your plants
- Blue light stimulate stem and leaf growth
- Red light stimulate flowering and seed production
- Green and Yellow light are not as useful

Carotenoid Synthesis

Carotenoids are required for plants to stay healthy. They have the ability to absorb destructive free radicals from solar damage and chlorophyll production. With the presence of carotenoid, plants will be able to produce more chlorophyll which will result the plant having a deeper green. Carotenoid has an absorption peak of 612nm (Orange light), in addition for maintaining the plants health, they will also help in photosynthesis because the energy they absorbed will be passed to chlorophyll.